24 x 10/100Mbps Base-TX RJ45 ports for data transmission and power
supply, 2 x 10/100/1000Mbps Base-T RJ45 ports for data transmission, 1 x
1000Mbps Base-X combo SFP slot.
Compliant with IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3x and IEEE802.3af/at standards.
IEEE 802.3x-compliant full-duplex flow control and half-duplex backpressure flow control.
8.8 Gbps backplane bandwidth.
16 K MAC address table and MAC address auto-learning.
Maximum power consumption of a single port: 30W; Maximum power consumption of the switch: 250W.
4MB cache size for smooth video surveillance.
4 Modes: Standard, Priority, Extend and VLAN.
PoE Ports
24 PoE Ports
Network Port
24 x 10/100 Mbps Base-TX RJ45 ports (Data/Power) 2 x 10/100/1000 Mbps Base-T RJ45 ports (Data) 1 x 1000 Mbps Base-X SFP port (Combo)
LED light
24 x Link/Act LEDs 1 x G1 LED 1 x G2/SFP2 LED 1 x PoE-MAX LED 1 x Power LED
Ports 1-24 support standard IEEE802.3af/at 30W output per PoE port 230W output of the total PoE Power
Forwarding Rates
6.55 Mpps
Power Consumption
250W output the whole device
MAC Address List
16K
Four Modes
Standard: Default mode of the switch. In this mode, it works as an unmanaged switch; all ports can communicate with each other separately. Priority: In this mode, port G1 and G2/SFP2 serve as uplink ports, ports 1 – 8 serve as high priority port. All ports can communicate with each other separately. Extend: In this mode, data rate of ports 17 - 24 reduces to 10 Mbps, the maximum transmission distance can be 250 meters, and all ports can communicate with each other. VLAN: In this mode, ports 1 - 24 of the switch can communicate with port G1, G2/SFP2 separately, but cannot communicate with each other. You can enable this mode to reduce broadcast storm and isolate DHCP broadcast.
